6mm Creedmoor

17remhunter

Active member
Would you guys mind sharing your loads. Primer, Bullet, Powder, seating depth, Brass
Thus far my load is 44.2 gr N555 Peterson Brass SRP. BR -4. 107 gr MKX .025 off.
 
Last edited:
Once the rifle is together..... But not sure about sending the loads..... Ha Ha.. ok funny joking part is over.
I'm fully aware of your intent in the request, just figured I'd have some fun a bit.

 
This would be more suited in the reloading section.

Yes, I mind.

There's to many variables in chambers and rifles to give a specific load data.
 




 
I like N555. Accurate but slow. Maybe try RL-16. I get better speed and the same accuracy with less powder. 108’s and 109’s do best for me at 2875 FPS. 90 gr ELDX shoot very well for me at 3150 FPS using RL-16. I have also loaded 58 VMAX at 3925 with H4895. Sub-MOA and a very nice PBR if your thermal doesn’t have LRF. I have the same love for the 6CM that I had for the .308 when I first started loading for it. It shoots so many bullets well and doesn’t beat you to death at the range. Have fun.
 
I've had 41.7-41.9grn H4350 under a 105 Hybrid in Lapua and Hornady brass, over WLR's, BR2's, 200's, and 250's, seated anywhere from 5 thou to 150 thou off of the lands shoot well in 13 different barrels from (at least) 6 different reamers and 5 different barrel makers.
 
19” brux barrel 1-9twist hornady 108eldm 43.5gr vv n555 105thou off lands cci250 primer Peterson lrp brass just over 3,000fps.
 
Back
Top