New posts

Reply to thread

Message

There is several things that can affect your accuracy. For one that 10 twist barrel will do better with 95g and smaller pills. I have seen a few that shot the 100s but most dont like anything that heavy. Another thing is how much neck tension are you using? I remember years ago i only neck sized for my bolt guns. When i first started full lenght sizing my accuracy went south bad. I discovered it was the die had to small of a mandrel and i was sizing my necks down to much. Also do you know how far off of the lands you are? Seating depth makes a big difference as well. Some bullets will like more of a jump than others. And you can change your brand of primers and get different results. Also i try not to waste alot of componets so if i dont get any accuracy with a load soon i will switch powders and start over. Hope this helps feel free to pm me if you have any questions.

<blockquote data-quote="hunter243sgk" data-source="post: 3059926" data-attributes="member: 59656"><p>There is several things that can affect your accuracy. For one that 10 twist barrel will do better with 95g and smaller pills. I have seen a few that shot the 100s but most dont like anything that heavy. Another thing is how much neck tension are you using? I remember years ago i only neck sized for my bolt guns. When i first started full lenght sizing my accuracy went south bad. I discovered it was the die had to small of a mandrel and i was sizing my necks down to much. Also do you know how far off of the lands you are? Seating depth makes a big difference as well. Some bullets will like more of a jump than others. And you can change your brand of primers and get different results. Also i try not to waste alot of componets so if i dont get any accuracy with a load soon i will switch powders and start over. Hope this helps feel free to pm me if you have any questions.</p></blockquote><p></p>

[QUOTE="hunter243sgk, post: 3059926, member: 59656"] There is several things that can affect your accuracy. For one that 10 twist barrel will do better with 95g and smaller pills. I have seen a few that shot the 100s but most dont like anything that heavy. Another thing is how much neck tension are you using? I remember years ago i only neck sized for my bolt guns. When i first started full lenght sizing my accuracy went south bad. I discovered it was the die had to small of a mandrel and i was sizing my necks down to much. Also do you know how far off of the lands you are? Seating depth makes a big difference as well. Some bullets will like more of a jump than others. And you can change your brand of primers and get different results. Also i try not to waste alot of componets so if i dont get any accuracy with a load soon i will switch powders and start over. Hope this helps feel free to pm me if you have any questions. [/QUOTE]

Verification