Reply to thread

A regular full length sizer die would work fine, after you progress as a reloader you may want to consider a neck only sizing die to add to your collection.  With a neck sizer you won't work your brass as much, you will get more life out of it and potentially more accurate ammo. You will still want that full length sizing die even then to bump the shoulder back if they need it.


If you plan to reload a lot of bottle neck cartridges you will also want either a trimmer or a filing die to get your brass the right length, bottle neck cases grow when you shoot them and over time they will go too long out of spec and need to be shortened.  You can get by with a few loading without it but make sure you measure the overall length after you resize your brass each time, if it gets too long it can be unsafe


Back
Top