Quote:Guess what, most of these still would not chamber. I ended up sizing them down to 2.673" to get them were they would chamber. That's .007" bump from a case fired in this gun. WHY WHY WHY?
A little more info new lapua brass measures 2.671" and new rem measures 2.673".do remington cases chamber? What am I missing here? Im convinced the issue is the brass but where? I do use the dies for a different gun using used brass and I have never run into this. Can anyone offer some insight to what's happening?
THANKS
Will new Remington case chamber?
If Lapua brass chambers @ 2.671" sounds like your chamber is 2.671". Are you sure of your fired case measurement?
Push bolt down a little harder to see if you can get your colored cases to mark. I prefer sight black as sometimes markers are a bit difficult to scuff??
Are you trying to chamber the empty sized cases or are you reloading cases and then trying to chamber? If resized empty cases will chamber but reloaded rounds will not that could be an ENTIRELY DIFFERENT PROBLEM.
Regards,
hm
