I have noticed that a lot of you guys are packing your rs callers in a tackle box or building your own custom box to hold the unit.
I have come up with what I feel is the perfect package.
I have taken a 13" piece of thin wall PVC pipe and put a clean out on one end and the speaker fits right in the other end with a couple of small bolts to hold it in place.
You have plenty of room inside to hold the amp and remote unit if you have one.
I did do some re-wireing to the rs mini-amp.
I put a switch and a volume control on the outside of the pipe, also extended the ext. speaker jack to the outside since I am not using a remote yet. I also extended the battery wire from the amp to the back of the pipe (just inside the clean out) installed a 9 volt battery clip, now it is very simple to change the battery. I wraped the whole thing in camo tape(pvc will not hold paint well) and attached a couple of I-bolts to hold a sling.
A very slick package if I do say so myself!
It looks just like a log laying in the brush.
Now if I could figure out how to get rid of the amp noise I would be happy.
Bake.
