Berger bullet load help

nastynatesfish

nastynatesfish

Active member
Ive got 200 of thes hunting vld to shoot in my 7-08 when I get it done. I was wondering if someone can give me a start and stop charge and a min OAL to start some in my 7 rem mag? Figured I'd try here before emailing Berger. I'm using H4831 and have some rl 19 and rl 22 sitting. Thanks ahead
 
Ya sorry 140s. Bushy I'm looking for both loads to work but right now I'm looking for info for 7 rem mag. I won't have my 7-08 barrel till December or early January
 
Take a look at this. It really helped me with the 140 grain VLD's. This comes from the berger website.

Getting the Best Precision and Accuracy from VLD bullets in Your Rifle

Solution

The following has been verified by numerous shooters in many rifles using bullets of different calibers and weights. It is consistent for all VLD bullets. What has been discovered is that VLD bullets shoot best when loaded to a COAL that puts the bullet in a “sweet spot”. This sweet spot is a band .030 to .040 wide and is located anywhere between jamming the bullets into the lands and .150 jump off the lands.

Note: When discussing jam and jump I am referring to the distance from the area of the bearing surface that engages the rifling and the rifling itself. There are many products that allow you to measure these critical dimensions. Some are better than others. I won’t be going into the methods of measuring jam and jump. If you are not familiar with this aspect of reloading it is critically important that you understand this concept before you attempt this test.

Many reloaders feel (and I tend to agree) that meaningful COAL adjustments are .002 to .005. Every once in a while I might adjust the COAL by .010 but this seems like I am moving the bullet the length of a football field. The only way a shooter will be able to benefit from this situation is to let go of this opinion that more than .010 change is too much (me included).

Trying to find the COAL that puts you in the sweet spot by moving .002 to .010 will take so long the barrel may be worn out by the time you sort it out if you don’t give up first. Since the sweet spot is .030 to .040 wide we recommend that you conduct the following test to find your rifles VLD sweet spot.

Load 24 rounds at the following COAL if you are a target competition shooter who does not worry about jamming a bullet:
1. .010 into (touching) the lands (jam) 6 rounds
2. .040 off the lands (jump) 6 rounds
3. .080 off the lands (jump) 6 rounds
4. .120 off the lands (jump) 6 rounds

Load 24 rounds at the following COAL if you are a hunter (pulling a bullet out of the case with your rifling while in the field can be a hunt ending event which must be avoided) or a competition shooter who worries about pulling a bullet during a match:
1. .010 off the lands (jump) 6 rounds
2. .050 off the lands (jump) 6 rounds
3. .090 off the lands (jump) 6 rounds
4. .130 off the lands (jump) 6 rounds

Shoot 2 (separate) 3 shot groups in fair conditions to see how they group. The remarkable reality of this test is that one of these 4 COALs will outperform the other three by a considerable margin. Once you know which one of these 4 COAL shoots best then you can tweak the COAL +/- .002 or .005. Taking the time to set this test up will pay off when you find that your rifle is capable of shooting the VLD bullets very well (even at 100 yards).
 
Thanks that saves me from emailing them. I just need to load up a dummy round and push the bullet together lands. Does anyone know if the office is the same on the 140 compared to the 168s?
 
Originally Posted By: berger-kingif you contact berger and give them the caliber and bullet weight they will give you load data...


quick like too....within 8 hrs ime....
 
Originally Posted By: BODABTake a look at this. It really helped me with the 140 grain VLD's. This comes from the berger website.

Getting the Best Precision and Accuracy from VLD bullets in Your Rifle

Solution

The following has been verified by numerous shooters in many rifles using bullets of different calibers and weights. It is consistent for all VLD bullets. What has been discovered is that VLD bullets shoot best when loaded to a COAL that puts the bullet in a “sweet spot”. This sweet spot is a band .030 to .040 wide and is located anywhere between jamming the bullets into the lands and .150 jump off the lands.

Note: When discussing jam and jump I am referring to the distance from the area of the bearing surface that engages the rifling and the rifling itself. There are many products that allow you to measure these critical dimensions. Some are better than others. I won’t be going into the methods of measuring jam and jump. If you are not familiar with this aspect of reloading it is critically important that you understand this concept before you attempt this test.

Many reloaders feel (and I tend to agree) that meaningful COAL adjustments are .002 to .005. Every once in a while I might adjust the COAL by .010 but this seems like I am moving the bullet the length of a football field. The only way a shooter will be able to benefit from this situation is to let go of this opinion that more than .010 change is too much (me included).

Trying to find the COAL that puts you in the sweet spot by moving .002 to .010 will take so long the barrel may be worn out by the time you sort it out if you don’t give up first. Since the sweet spot is .030 to .040 wide we recommend that you conduct the following test to find your rifles VLD sweet spot.

Load 24 rounds at the following COAL if you are a target competition shooter who does not worry about jamming a bullet:
1. .010 into (touching) the lands (jam) 6 rounds
2. .040 off the lands (jump) 6 rounds
3. .080 off the lands (jump) 6 rounds
4. .120 off the lands (jump) 6 rounds

Load 24 rounds at the following COAL if you are a hunter (pulling a bullet out of the case with your rifling while in the field can be a hunt ending event which must be avoided) or a competition shooter who worries about pulling a bullet during a match:
1. .010 off the lands (jump) 6 rounds
2. .050 off the lands (jump) 6 rounds
3. .090 off the lands (jump) 6 rounds
4. .130 off the lands (jump) 6 rounds

Shoot 2 (separate) 3 shot groups in fair conditions to see how they group. The remarkable reality of this test is that one of these 4 COALs will outperform the other three by a considerable margin. Once you know which one of these 4 COAL shoots best then you can tweak the COAL +/- .002 or .005. Taking the time to set this test up will pay off when you find that your rifle is capable of shooting the VLD bullets very well (even at 100 yards).

Works every time with VLD's. Must find a good node and adjust seating depth last.
 
Originally Posted By: nastynatesfishIve got 200 of thes hunting vld to shoot in my 7-08 when I get it done. I was wondering if someone can give me a start and stop charge and a min OAL to start some in my 7 rem mag? Figured I'd try here before emailing Berger. I'm using H4831 and have some rl 19 and rl 22 sitting. Thanks ahead

Of those powders the only one shown in their manual is the RE 19.
The manual shows an COAL of 3.290
Start load of 60.0, 2899 FPS
Max load of 65.0, 3130 FPS


The show IMR 4831 but not H4831.

Originally Posted By: lyotehunterberger has their own reloading manual coming out in oct.i think the first 3000 are signed by the staff including walt

Received mine a week ago.
 


Write your reply...
Back
Top