Reply to thread

Message

My method of sanding these bullets down is pretty ghetto. I use 60 grit paper to get through the jacket then move down to 120 for the finished look. I held them gently with little slip joint pliers to keep from crushing them. It Takes less than 10 minutes per bullet. Hm1996 had cool idea to mount them on a plaque, which I will be doing as I get through the bullets I have in stock. The more bullets posted up will just make this thread more useful.

[QUOTE="Dirty Hippie, post: 3093002, member: 52751"] My method of sanding these bullets down is pretty ghetto. I use 60 grit paper to get through the jacket then move down to 120 for the finished look. I held them gently with little slip joint pliers to keep from crushing them. It Takes less than 10 minutes per bullet. Hm1996 had cool idea to mount them on a plaque, which I will be doing as I get through the bullets I have in stock. The more bullets posted up will just make this thread more useful. [/QUOTE]

Verification