cheek riser help

H

HardwickN

New member
Im looking for a cheek pad riser for my wife's rifle. the only one I have found on amazon is made by voodoo. does any one have and suggestions on brand make or anything.

thanks
 
I just ordered two different ones from amazon and they must have had five pages or more of them. Try some different termination like "rifle cheek rest".

You can easily make them also. I cut up old neoprene waders and glue pieces to the comb with contact cement, or just tape them in place and cover with an Uncle Mikes elastic shell holder, you can also use multiple làyers of corrugated cardboard and cover with a elastic shell holder.
 
I got to agree with crapshoot, give the Triad cheek rests a look. Check them out on the web, don't have the address handy or I'd post it. Good luck and take care, John.
smile.gif
 
Originally Posted By: glockmeisterI got to agree with crapshoot, give the Triad cheek rests a look. Check them out on the web, don't have the address handy or I'd post it. Good luck and take care, John.
smile.gif


+2
 
Hardwick, approximately how high does she need to raise her cheek off the comb? If it's more than a finger widths then I would suggest making a raised area above the comb out of small diameter wooden dowel rods glued together. I can email you some pictures of mine if you like. I built up a little taller than needed then sanded it to the height I wanted and covered the "pile of sticks" with a cheek bag.
 


Write your reply...
Back
Top