You're very welcome. It is really a lot more simple to do than it is to explain how to do it. In all the Contenders I have worked with over the years (and there has been many, many different Contenders over the years) I think I have only had to do any polishing on a couple.
A little note I forgot to mention. If the engagement becomes to fine the action may not cock. If this happens it is a simple matter of backing out the engagement screw in the front of the trigger slightly. The other neat thing about this design is, if the screw should turn out during use it only increases the engagement between the trigger and striker rather than decreasing the engagement and causing a dangerous situation.
Good luck and of course the standard disclaimer applies.
Larry
