cz 452 22lr

E

Ernest II

New member
Picked me up another 22lr today.Yes its a CZ 452. I have been wanting one but they are a little hard to find since the 455 came out.Mounted a scope and adjusted the trigger and shot about 8 rounds just to rough sight in. I may have to take a coil off the trigger spring to get a little lighter pull. I may also try a shim on the shelf of the sear to make a shorter pull.Has anyone tried this and whats your opinions on the 452?
Thanks
Daryl P.
 
Yo Dave kit is the way to go. Every 452 I've own gets one. Easy to install. If u have different functions for a couple rifles u can do a couple trigger jobs out of a single kit. Done one of my bench guns really light and then used some of the other springs and shims out of the same kit to do a hunting set-up.
 
I appreciate the help. I just removed one coil 0f the trigger spring and polkished the sear with jewlers ruge.Man that made a diff. I really dont think any lighter trigger is necessary. I do not have a gauge but it sure feels like about 2 lb. Theres a little creep but it is smooth. I will try and add a shim to the trigger to take up the creep. This shouldnt be hard. I could stone the trigger but the shim would be best incase I need to remove it and I wont have to be concerned about taking to much metal away.I believe I will really be liking this rifle.I need to find a nice trigger shoe for it to widen the surface are for a better feel.
Thanks
Daryl P.
 
Originally Posted By: getfoxyThe yo Dave trigger kit is what I'd be looking at...

+1 Makes a nice trigger.
 


Write your reply...
Back
Top