FoxPro Fury 2 charger issues

jhartwig24

jhartwig24

New member
Ok guys, I sent an email to FoxPro asking about this as well, but I thought maybe someone on here could answer it faster, or maybe knows how to fix this problem.
I just took my Fury 2 out of storage and getting it ready to go for the season, I put the batteries into the call, plugged in the charger jack, then plugged it into the wall. The green light on the charger doesn't come on at all, and the little light on the charger itself, blinks red, green, red, green, then goes off and stays off! I'm wondering what the problem could be. I've tried several different outlets in my house, and I've made sure the batteries are in the correct direction, but still the same issue, so just wondering what the problem is, or how to fix it?

Thanks
 
Originally Posted By: Yote Yoda USMCJust a guess-----its one of the batteries.

That's my guess too.
Do you have a separate charger?
 
Well, I was talking with the FoxPro service dept, and they suggested it was in the batteries as well, they said that the charge on them was probably too low to register, so I took a separate charger and charged up 2 of the batteries for an hour, then put them back in, and everything works great! My first thought was batteries as well, but I've never seen the led flash red, green, red, green before, so I just wanted to make sure the charger itself didn't go bad, but it's all fixed! Thanks guys, hopefully gonna get out on Sunday after the big storm passes through and kill some yotes!
 
My smart charger goes through a series of flashes like that, but stays on until the charge is complete. In a large number of problems like you described, batteries turn out to be the culprit.
 


Write your reply...
Back
Top