Thanks Todd.......
Hi Peter......
The only thing I can add to Todd's responce is to ware cotton gloves or use tussue and pull bulb stright out......
The 2 holes are spring loaded, when replacing bulb use a Firm grip and push in...........it needs to be Level and don't twist the bulb it will break......
If it seems to tight, use a paper clip and bend the shaft end of it and protrude it in the holes a couple of times, to make sure there working.........it will be a Snug fit..
Install the Bulb.............use cotton gloves or tussue to Install......if you touch the bulb,(with Fingers) wipe clean with Achocal...after install...
Install the Globe (Housing) and turn all the way in for the Spot beam........if the beam is not true,(dark Hole in Middle) you may have to pull the bulb out a little for beam adjustment, in Incerments.and try it again untill you have a Solid beam of light in the Spot mode......
When you roll the head out, you will have a Dark hole in the Middle in the Flood Mode.........(Normal) works just Like a Mag-Light......
If you have any problems, Call me.........# 954-854-0444
