Hornady Load Data

Ranger66Rick

Ranger66Rick

New member
Anyone have a Hornady reloading manual, I looking for some data for my 270win. I am loading some 110gr Hollow Points and need to know what the min/max charge would be for IMR4350 and the COL. I was loading 100gr speer HP and using their manual but I couldn't find the 100gr speers so i bought 110 hornady's figuring there would be data in the speer book for 110's but there isn't. Help would be greatly appreciated, and if someone has a pet load for 110 hp's please share.
 
Rick,

I have the Hornady 3rd Addition reloading manual.

Page 169, 110gr Hollow Point:

IMR 4350

53.0 grains 2900fps
54.4 grains 3000fps
55.7 grains 3100fps
57.1 grains 3200fps
58.4 grains 3300fps (Caution this is the MAX load)

Hope this helped,

Steve
 
Ok thanks, but I have asked this question on a few other boards, I have been getting mixed answers on COL you and another guy says 3.165 and another couple guys say 3.305, is that a big differance or something I should be worried about when loading.
 
COL is the minimum SAAMI specification. By making the ound slighty longer you are not going to affect much if anything. As long as the bullet fits in your clip and chambers easily you should have no worries.
 


Write your reply...
Back
Top