Hornady Lock-n-Load Classic Owners!!! HELP

[blopez50]

I need some help STAT!

Im building my bench and need some measurements from my press... unfortunately it is 4 hours away...

I need to know the measurement from the flat part that fits square against the front of the bench to the two holes to bolt it to the bench.

Thanks VERY much for your help!

its this press
http://www.cabelas.com/presses-dies-hornady-lock-n-load-classic-8482-reloading-kit.shtml?type=product&WT.tsrc=CSE&WT.mc_id=GoogleBaseUSA&WT.z_mc_id1=740228&rid=40&mr:trackingCode=EFB9B7CC-958E-DF11-A0C8-002219318F67&mr:referralID=NA

 

[blopez50]

Somebody help a brotha out!

 

[Vartarg217]

I measure 2 7/8" on mine from the edge of the bench to the center of the bolt holes....hope that helps.

 

[blopez50]

Thats perfect thanks!