Reply to thread

Message

For .223 and smaller you want a 1/2x28 thread and will need .600 minimum at the muzzle to have enough shoulder for the suppressor to butt up against. For .243 and larger you usually want a 5/8x24 thread and will need .720 minimum at the muzzle. There are exceptions however, like I'm having my Tikka T3 Lite .243 and .270 threaded 1/2x28 and using a 5/8x24 thread adapter. The .270 is getting a little thin between the bore and threads, but I've been told it will be fine.

[QUOTE="roky0702, post: 2905784, member: 31466"] For .223 and smaller you want a 1/2x28 thread and will need .600 minimum at the muzzle to have enough shoulder for the suppressor to butt up against. For .243 and larger you usually want a 5/8x24 thread and will need .720 minimum at the muzzle. There are exceptions however, like I'm having my Tikka T3 Lite .243 and .270 threaded 1/2x28 and using a 5/8x24 thread adapter. The .270 is getting a little thin between the bore and threads, but I've been told it will be fine. [/QUOTE]

Verification