Muzzleloader powder

yotekilla313

yotekilla313

New member
I recently got a Thompson Center FX and was looking for powder recomendations. I had a muzzleloader in the past and used Triple 7. What are you guys using and why?
 
Blackhorn 209. It has been very accurate in my TC Triumph, cleans up with regular smokeless powder solvents, can be weighed on a regular reloading scale if you want, and doesn't require swabbing between shots (although it has worked best for me running a dry patch through every few shots). They also say it is non-corrosive, and I have not seen anything in my rifle to say that they are wrong.

The downsides are that it is fairly expensive and does not come in handy pellet form, but the benefits have been worth it to me.
 
I use the Pyrodex pellets simply because they are easier to work with in the field.

Not sure about the rifle you are using but I think the pellets need the 209 primer to get good ignition.
 
I have a Pro Hunter and a older Encore 209x50 they both shoot the BH 209 well and you can't beat it for clean up. They also shoot T7 pellets good but I would have to clean between shots to load it again
 
I use to use 777, then switched to Blackhorn. The other day I had a box of Pyrodex pellets given to me, so I gave them a try. Accuracy was better than the 777 or BH so I will be using pellets this year.
 
Originally Posted By: mac805Blackhorn 209. It has been very accurate in my TC Triumph, cleans up with regular smokeless powder solvents, can be weighed on a regular reloading scale if you want, and doesn't require swabbing between shots (although it has worked best for me running a dry patch through every few shots). They also say it is non-corrosive, and I have not seen anything in my rifle to say that they are wrong.

The downsides are that it is fairly expensive and does not come in handy pellet form, but the benefits have been worth it to me.

+1
Blackhorn 209 all the way. Very clean, very consistant.
 
If you gun is made to handle it I'd go right to B209 powder.

Try testing over a chronograph if you can. If you do you will toss over half the powders & pellets advertised.
 
Another vote for Blackhorn 209...when I bought my Encore Endeavor I started right off with it. Unlike when I used to use 777 I don't have any rust at all after shooting my Encore....none in the action....none in the breech plug.....none in the bore.....it looks like brand new still. It's also very accurate powder, with 90 grs my Encore is a tack driver.
 
Right now I'm using Pyro Select.I still have a few 50gr Pyro pellets and some T7 powder on hand.After all this is gone I will try the Blackhorn having heard so many good reports on it.
 
Another vote for Blackhorn 209. I started my CVA Optima
out on it, and have never looked for another powder.
Non-corrosive, cleans with any powder solvent, and puts
the PowerBelt bullets into tight groups. I really like the
idea that I can leave it dirty for a few days, and not worry
about rust...Even in my stainless barrel.

Squeeze
 
Will the Blackhorn 209 work OK in a traditional side lock rifle with regular rifle caps? What is the best powder for a Ruger Old Army Revolver?
Frank
 
Originally Posted By: Frank44Will the Blackhorn 209 work OK in a traditional side lock rifle with regular rifle caps? What is the best powder for a Ruger Old Army Revolver?
Frank

Nope, requires a sealed ignition and full strength 209 primers.
 
Last edited:
I've used 777 for years with unparalleled accuracy. 3 pellets with the original TC shockwave in 300 grains. I have tried this load in 4 different TC muzzle loaders and all patterned from one ragged hole to under an inch. Never tried the 209 but have been muzzle loading since the 80's when pellets were nonexistent and don't plan on ever using loose powder in the field again. It's a pain...if you spill a grain or two your groups are going to open up.
 
Last edited:
Back
Top