powder sticking to trickler?

B

bobeano

Active member
I was useing some titegroup powder,and i notice when i go to empty my trickler when i am done there a lot of powder sticking to the sides,and very hard to get it cleaned out.
What causes that.
Whats best way to clean out stuck power,bumping dosnt do much.
Is there anything i can do to stop it.
Ive noticed it a little with other powders,but a bump would get it out.

Notice others when it happend was a ball powder,this titegroup is a flake powder.

By the way it a redding trickler,made from some kinda metal,its heavy.
 
If the dryer sheet doesn't eliminate the problem, you may need to tear it down and wipe the components with plain old alcohol...Depending on the humidity level, it can collect a slight amount of moisture and that will cause powders to start sticking as well..
 
Go to the store and get yourself some "Static Guard" it works wonders. If it is a problem with Static.

If your trickler is metal, clean with alcohol or Gun Scrub or Brake Klean.

DAB
 
Last edited:
Originally Posted By: pahntr760I've never had powder stick to my Redding trickler.

Me either. I have had it stick to some of my plastic funnels but never to the metal trickler.
 
Back
Top