Yes, there is. You have to grind or file just a small portion of the magazine that fits around the bracket - right where I've marked with arrows.
Now, even having done that, you may still experience feeding difficulties. If so, you will probably have to bend the clip bracket very slightly forward. It's on the far left edge of this picture. Please forgive all the masking tape and q-tip; I took this picture while improvising a bedding for the action of this rifle in it's synthetic stock.
I found it easiest to remove the bracket and the retaining piece (that holds the clip in place on the bracket) from the action while bending them. Be sure to use blue Loc-tite on the bolts that hold them on when you reinstall them.
Good Luck!
me!
