Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
You should be okay here. Screw the sizing die down intil it touches the shell holder. Now loosen the stem and turn the stem down until you feel it make contact with the case shoulder. Now lower it about 1/8th of a turn more. This is to bump your shoulder back when you resize. You should be good to go, but you might be wise to test this case in the rifle to make sure the bolt closes smoothly on it. Best wishes.Cal - Montreal
You should be okay here. Screw the sizing die down intil it touches the shell holder. Now loosen the stem and turn the stem down until you feel it make contact with the case shoulder. Now lower it about 1/8th of a turn more. This is to bump your shoulder back when you resize. You should be good to go, but you might be wise to test this case in the rifle to make sure the bolt closes smoothly on it. Best wishes.
Cal - Montreal
