Start with a MEC 600 jr. and when your tired of that buy a Dillon and be done with it.......
I used AA hulls 16.2 Grains of Clays with WAA12 "white" wads 1 1/8 oz of #8 shot with a W209 primer...1150fps ish.
If you go to 18.2 grains and keep the rest the same it will give you 1250-1300 fps.
The top load is my singles load and the second is my handicap load.....easy, just change the powder up 2.0 grs. and there you have it...
As for how long a hull is good for, it depends on the hull....The AA`s that i use are good for 8-10 reloads, but you have to take a good look at the plastic bases in them, they will dislodge and can get stuck in your barrel...
Good luck, reloading is just as much fun for me as shooting...
Phil.
