Generally, most want zero creep but if the Rem model seven trigger is like the 700 trigger you should be able to increase sear engagement which will give it more pre-travel/creep. On a Rem 700 there is usually three adjusting screws, two in the front, one in the back. The adjusting screw in the back controls sear engagement and screwing it in will cause it to have more creep/pre-travel but even though you can make it have more creep it most likely still won't feel the same as a two stage trigger and that increased creep you add to it by adjusting the sear engagement screw may not be a smooth pull like a two stage and could actually make things worse for you.
Maybe increase the pull weight so the trigger isn't so light. It still won't have any creep, unless you adjust the sear engagement also, but at least it'll have a heavier pull before it goes off and you'll feel more in control of when it goes off.
