Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
So I tried it out today with a drill/deep socket and propane torch. The good news is that the 'donuts' or whatever tight spot I had in the case neck is fixed. However, I can't seem to reach that dark red glow, no matter how long I leave them in the flame or how close to the torch I get. (Don't worry, I'm testing it on trash brass, just to get a feel for it.) The test brass has been Winchester and old Lapua .243 AI cases. Any ideas?
