Load #11
12 Gauge
Hull: Federal 3 1/2”
Primer : WW-209
Powder: 38grs Alliant Blue Dot
Wad Column: WAA12R – (1) 0.030” over shot wad placed in base of shot cup
Buffer: Ground polyethylene (Ballistic products SD-C works well - add about 2 grams of molybdenum disulfide to 1 pound of buffer) – add buffer with gentle tapping till all interstitial sites are filled and the buffer is level with the top of the shot column (about 28 grains).
Shot: 42 pellets lead 4-buck
Crimp: Fold crimp with a Precision Reloading tyvek over shot wad on top of shot column. Seal the crimp with soft silicone
Velocity: 1100fps
Pressure: 12.2KPSI
Notes: Dirty at low temperature, seals back bored barrels fair.
