show your custom guns
- Thread starter Travis224
- Start date
crowpopper
New member
heres my varmint gun
It is an Airgun in .22 cal making 43 fpe currently and runs on HPA(high pressure air) I get 20 full power shots on a fill. And i am in the process of getting a bigbore kit for it. 308 cal.
currently this thing drops chucks and crows out to and a lil past 100 yards
it has on it a tasco varmint 6-24 x 50 scope
It is an Airgun in .22 cal making 43 fpe currently and runs on HPA(high pressure air) I get 20 full power shots on a fill. And i am in the process of getting a bigbore kit for it. 308 cal.
currently this thing drops chucks and crows out to and a lil past 100 yards
it has on it a tasco varmint 6-24 x 50 scope
claimbuster
New member
Super bad photos. This is SUN35 a Cooper 20VT sent to Leroy Barry for a piece of English walnut broomstick.
Scope is a Lupe VX-7, 3.5-14X50.
Scope is a Lupe VX-7, 3.5-14X50.
One of several but definitely one of my favs (really only the barrel is custom)
Match Grade Machine .204 Ruger full bull stainless barrel
tuned trigger 1.5 lb. (breaks like glass) on a AA TC Contender frame
Gunstocks Inc Walnut stock finished in Linspeed
Leupold VXII 4x12 AO
It rocks prairie dogs way out there.
Match Grade Machine .204 Ruger full bull stainless barrel
tuned trigger 1.5 lb. (breaks like glass) on a AA TC Contender frame
Gunstocks Inc Walnut stock finished in Linspeed
Leupold VXII 4x12 AO
It rocks prairie dogs way out there.
Last edited:
yfzduner450
New member
Here is my custom rifle built by Duane at Shooters Services Unlimited. It's a 22-250 built with a worked Remmington 700 action, 22" Douglas barrel with a H.S. precision stock. The trigger is a tuned stock trigger set to 2lbs. By far the most accurate rifle that i've ever owned.
the noobie
New member
crappy pic but heres the .22-284. its not fancy or anything but its a neat round
Last edited:
Duane@ssu
New member
.22/284 How does it shoot? I have built a few 6/284's, and a 6.5 /284 for my 1000yrd gun.
Seems to me the .22/284 is over bore enough that it would burn the throat, or at the very least not be so efficient?
What bullet weight are you using?
I'm just perplexed by the idea of the cartridge design.
Seems to me the .22/284 is over bore enough that it would burn the throat, or at the very least not be so efficient?
What bullet weight are you using?
I'm just perplexed by the idea of the cartridge design.
the noobie
New member
Originally Posted By: Duane@ssu.22/284 How does it shoot? I have built a few 6/284's, and a 6.5 /284 for my 1000yrd gun.
Seems to me the .22/284 is over bore enough that it would burn the throat, or at the very least not be so efficient?
What bullet weight are you using?
I'm just perplexed by the idea of the cartridge design.
sorry for such a late reply just got back from a roadtrip with my dad. anyways, i dont know crud about this gun. ive personally shot it 3 times and my dad has shot it maybe 15 times. what little i know about it and some stats and articles ive looked at about it is that it is a barrell burner and it can shoot out to about a thousand yards (i think thats pretty neat a .22 cal shooting that far)
as far as the load we shoot i have no clue if i remember right it has a 55gr bullet but again im not 100%
ill try and get my dad to find all of the stuff the gunsmith that built it had dont with it and what he wrote down
Seems to me the .22/284 is over bore enough that it would burn the throat, or at the very least not be so efficient?
What bullet weight are you using?
I'm just perplexed by the idea of the cartridge design.
sorry for such a late reply just got back from a roadtrip with my dad. anyways, i dont know crud about this gun. ive personally shot it 3 times and my dad has shot it maybe 15 times. what little i know about it and some stats and articles ive looked at about it is that it is a barrell burner and it can shoot out to about a thousand yards (i think thats pretty neat a .22 cal shooting that far)
as far as the load we shoot i have no clue if i remember right it has a 55gr bullet but again im not 100%
ill try and get my dad to find all of the stuff the gunsmith that built it had dont with it and what he wrote down
SuperSeal110
New member
yfzduner450
New member
Very nice guns, superseal.
jlutcher51
New member
Let's hear some more about them super seal
Ambush Hunter
New member
This is my p-dog and pigeon slayer, German Weihrauch, HW100T. Yes, a high presicion multi-shot airgun. I can also operate it where noise is a big issue. All you hear is a gentle puff. Effective range is around 120 yards on a good day...
Last edited:
RePete
New member
Couple of 700's.
Front one's a 17Rem. Pac-Nor 24", #5 contour,9twist 3grove Super Match barrel in a Holland stock.
Wears a 4.5-14 VXIII, and shoots 25gr Nagel's at 4120.
Back one's a 22BR. Pac-Nor 24", Sendero Contour, 14twist, 3grove, Super Match in a HS PSS stock.
Wears a 6-18 VXII and shoots 52gr SMK's at 3650.
Both have tuned, older Remmy triggers set at 1.5lb's, and shoot .5 MOA very consistently.
I've got a couple of other Pac-Nor barreled 17cal sporters, but you asked for Varmint rigs.
Front one's a 17Rem. Pac-Nor 24", #5 contour,9twist 3grove Super Match barrel in a Holland stock.
Wears a 4.5-14 VXIII, and shoots 25gr Nagel's at 4120.
Back one's a 22BR. Pac-Nor 24", Sendero Contour, 14twist, 3grove, Super Match in a HS PSS stock.
Wears a 6-18 VXII and shoots 52gr SMK's at 3650.
Both have tuned, older Remmy triggers set at 1.5lb's, and shoot .5 MOA very consistently.
I've got a couple of other Pac-Nor barreled 17cal sporters, but you asked for Varmint rigs.
ARCOREY
New member
Here's my work in progress. It started as a stock Remington 700SPS Varmint in 243winchester. I painted the stock and bedded the forearm, replaced the trigger with a Rifle Basix LV-1K set around 10oz., put a Badger Ordinance picatinny 0MOA rail on it, had it duracoated coyote brown, then replaced the stock with a Bell and Carlson A2 stock with Eagle stock pack and had a Badger Ordinace bolt knob installed. I just got it back from Bartlein and here's how she looks now, naked, I'm still doing stock work to get her to fit and getting ready to load some rounds for it before I mail it off to get a Ceracoat job on all the metal. Barlein trued it up, replaced the lug and pinned it, replaced the barrel with a 9 twist Remington varmint contour with 3" of no taper on the chamber end and chambered it back in 243win finished out at 28". Here's the start to current pictures of the progress.
