Silencer co Omega

I picked mine up a couple days ago and so far its awesome. made adjustments for point of impact change and hitting dead on at 600 yds, as soon as wind goes down going to shot it out to 1000 yds. I put it on a rem 700 in 22-250 sounds like a .22 long rifle. I did go ahead and put a .22 cal end cap on it.
 
Originally Posted By: HouseCatIs anyone using the silencer co Omega? What is your thoughts? Pros and cons?

Very capable suppressor. They are versatile, adaptable, and can change out front caps.
The kits come with 5.8x24 DT end cap, plus ASR mount, and ASR QD muzzle device.

They are great for 556, and 300 BO, But due to the smaller volume, they are not the quietest suppressor with short action 308 based cals.

They rated for 300 WM, I have shot them on one. They are better then nothing, but not that quiet.
I preface this: It is only a 6" suppressor, with a 1" anchor brake.
For a small, light , versatile suppressor is is good.

I have them in stock.
Feel free to call me at 816-718-9489.
Thanks
Steve
RLTW
 
I'm very happy with it. I have a saker and a harvester as well.

The omega lives permanently on a 8.2" noveske 300 blackout. It's lighter and slightly quieter than the saker. I can't really compare the harvester as I haven't both shot them on the same gun.

I shoot hand loaded 125 gr sst over a max powder load and that sbr is miserably loud without the can. With it, it's extremely comfortable. The other day I shot a coyote and my buddy was about a hundred yards away sitting in the ranger. Said he could barely hear it.

I wouldn't have any qualms about any silencerco product. They're a good company.
 
I have one and I absolutely love it. However I had my first issue with the inside baffle stack coming unglued from the tube. From what I have read it will still function but needs some more glue or locktite. I am sending it back to silencerco to have them fix it.
 
The core is glued but is still screwed to the core. When you take off the ASR mount or muzzle brake that is when it starts showing. This is also why they say not to shoot it without the muzzle brake or front end cap. I have read that they pay for shipping. My guy did not offer to pay for my shipping. So I sent it slug mail. They should be getting it today. I love the suppressor, just hope this isn't a consistent issue.
 
Originally Posted By: DJ_MackThe core is glued but is still screwed to the core. When you take off the ASR mount or muzzle brake that is when it starts showing. This is also why they say not to shoot it without the muzzle brake or front end cap. I have read that they pay for shipping. My guy did not offer to pay for my shipping. So I sent it slug mail. They should be getting it today. I love the suppressor, just hope this isn't a consistent issue.

I have only had a couple of suppressor come back and need it. My guess is a bad lot of adhesive.
SICO will get it fixed or make it right. They are a great company when it comes to CS.

good luck. keep us informed if you don't mind.
 
Originally Posted By: Rangerwalker71Originally Posted By: DJ_MackThe core is glued but is still screwed to the core. When you take off the ASR mount or muzzle brake that is when it starts showing. This is also why they say not to shoot it without the muzzle brake or front end cap. I have read that they pay for shipping. My guy did not offer to pay for my shipping. So I sent it slug mail. They should be getting it today. I love the suppressor, just hope this isn't a consistent issue.

I have only had a couple of suppressor come back and need it. My guess is a bad lot of adhesive.
SICO will get it fixed or make it right. They are a great company when it comes to CS.

good luck. keep us informed if you don't mind.


Of course I will keep everyone updated.
 
Originally Posted By: DJ_MackI have one and I absolutely love it. However I had my first issue with the inside baffle stack coming unglued from the tube. From what I have read it will still function but needs some more glue or locktite. I am sending it back to silencerco to have them fix it.

Not really what I wanted to hear considering I have started the long anticipated wait for mine. Hopefully they have found and fixed the problem. Thanks to everyone for all the replies.
 
I got mine back after a few days being gone. Silencerco only had the can for 2 days and sent it back. They made that can look brand new and recoated it, which took away the scratch and heat markings I had on it. Good customer service. I would not be worried about the omega.
 


Write your reply...
Back
Top