Reply to thread

I adjusted the trigger on my Stevens 200 to just over 3 pounds. Remove the stock and look at the trigger area. You will find a horizontal spring about an inch long. There is a screw under it. Back the screw off until you get just a hair over 3 pounds. Use a trigger pull guage to set it. I think you will find it very comfortable at 3+ pounds. Should take you all of about ten minutes to do it. If you get it to light the bolt may not set every time and be sure to check the safety operation.


 RTLOF(TONY) /ubbthreads/images/graemlins/grinning-smiley-003.gif


Back
Top