Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Not sure if this will address your problem, out of 3 .44mag Ruger revolvers I had two of the barrels rotate (turn). The first was a SBH and I sent it back (my expense) they reurned it repaired 30 days later which was ok. The second was a Redhawk also a 7.5" with a scope on it and could not sight it in after some shooting. This time C/S had some concern and sent me a pre-paid shipping including ins none of which is cheap. They replaced parts and to date it works ok but I have not fired that much thru it. My SBH barrel turned again and I asked Ruger to be kind as I had the barrel cut down to 4.5 to shoot only .44sp so voided the warrenty. They repaced everything on the gun except the frame and the cylinder and installed a 4.5" barrel. I am happy with this. Not to be alarmed about Ruger, S&W had the same problem on .44 mags and pinned there barrels. It is easy to tell just look at it from the muzzel and see if its square.Jim
Not sure if this will address your problem, out of 3 .44mag Ruger revolvers I had two of the barrels rotate (turn). The first was a SBH and I sent it back (my expense) they reurned it repaired 30 days later which was ok. The second was a Redhawk also a 7.5" with a scope on it and could not sight it in after some shooting. This time C/S had some concern and sent me a pre-paid shipping including ins none of which is cheap. They replaced parts and to date it works ok but I have not fired that much thru it. My SBH barrel turned again and I asked Ruger to be kind as I had the barrel cut down to 4.5 to shoot only .44sp so voided the warrenty. They repaced everything on the gun except the frame and the cylinder and installed a 4.5" barrel. I am happy with this. Not to be alarmed about Ruger, S&W had the same problem on .44 mags and pinned there barrels. It is easy to tell just look at it from the muzzel and see if its square.
Jim
