Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Originally Posted By: coyotekillerNEThe best method I've found for cleaning a bore that's really dirty is to use one of my coated cleaning rods chucked in a cordless drill. Soak a brush down with a good lathering of Shooters Choice and 10w-30 motor oil. Just turn it on high and run it up and down the bore for 5 minutes or so re lathering every 30 seconds or so. The bore is a mirror when I get done.i use a 110 volt power drill. turns faster. takes half the time.
Originally Posted By: coyotekillerNEThe best method I've found for cleaning a bore that's really dirty is to use one of my coated cleaning rods chucked in a cordless drill. Soak a brush down with a good lathering of Shooters Choice and 10w-30 motor oil. Just turn it on high and run it up and down the bore for 5 minutes or so re lathering every 30 seconds or so. The bore is a mirror when I get done.
i use a 110 volt power drill. turns faster. takes half the time.
