168 gr Barnes tsx in 30.06

Yep, and they work great. I haven't had any problems with them. They work well with IMR 4064, IMR 4350, and H4350. My current load is IMR 4350 @ 57.5grs with Win brass, cci200 primer, .050" off the lands, and gets around 2850 fps with 22" barrel.
 
That should be able to handle any animal that walks in North America without question..now it's up to you..hit the spot and fill out the tags...
 
I use that bullet and 54.5 grains W760 in my Remmington 760 pump action (oal 3.350"). Shot a cow elk at 300 yards and it didn't take a step. It was drt! I also use that same bullet in a 300 win mag and a 300 rsaum. Never had an elk move after the shot.
 
Depends on the brass your using. Winchester brass with H4350, around 57.5-59grs you should find a good node.As always please work up to these loads.Good luck.
 
I used 150gr on elk last year, pushed by varget. It outperformed my buddies 300winny shooting 200ish gr.

I loaded them in 25-06 for deer and goats but didnt pull the trigger last year to see how they did, maybe next week.
 
A stiff load of RL19 under a 168gr TSX gets me 2,925fps out of my 30-06, with excellent accuracy.

That load will take anything in the America's.
 
Back
Top