20 Practical shooters

I thought about that. But everyone said the 223 seater would work. Will the 223 brass fit in a 204 seater die? $20-30 bucks isn't going to break the bank. I can get the 204 seater if that's what I need
 
Originally Posted By: CanineKillaI thought about that. But everyone said the 223 seater would work. Will the 223 brass fit in a 204 seater die? $20-30 bucks isn't going to break the bank. I can get the 204 seater if that's what I need

If you buy a HORNADY it will work as they are generic 20 caliber. I have used s REDDING competition 204 seater with the Practical. I prefer the HORNADY because I can use it on my 20P, 20T, 20 LBC, 20X6.8,20-250 and the 204. That's a lot of bang for your buck.

Greg
 
Originally Posted By: NdIndy2 bushings, all i got was destroyed brass trying it with 1.

Same here. I run LC brass through a small base die w/o the expander then use a .233 bushing then I use a .225 or .226 depending on the brass.
 
Originally Posted By: IAyoteHNTROriginally Posted By: NdIndy2 bushings, all i got was destroyed brass trying it with 1.

Same here. I run LC brass through a small base die w/o the expander then use a .233 bushing then I use a .225 or .226 depending on the brass.

Even though I have gone down 0.020 in one pass I like taking it down in 0.010 increments on the smaller stuff.

Greg
 
Back
Top