JerrySchmitt New member Jul 4, 2012 #21 I use the 75 VMAX in my old .243 AI. It's not a hot load for the AI but it's very accurate. Velocity is right at 3300 FPS from the 28 inch 13 twist barrel.
I use the 75 VMAX in my old .243 AI. It's not a hot load for the AI but it's very accurate. Velocity is right at 3300 FPS from the 28 inch 13 twist barrel.
B bobeano Active member Jul 4, 2012 #22 H4895 with fed match primer works good out of my mod 7 rem tried same with cci with less luck got some varget i am gonna try i also tried h380,but didnt do well with 75gr,but very good with seirra 85hpbt. Last edited: Jul 4, 2012
H4895 with fed match primer works good out of my mod 7 rem tried same with cci with less luck got some varget i am gonna try i also tried h380,but didnt do well with 75gr,but very good with seirra 85hpbt.
A ackleyman New member Jul 7, 2012 #23 If you have 12 bullets left, try 39.5 and 40.0g of IMR 4064 with a fed or cci primer...should get'r done!
If you have 12 bullets left, try 39.5 and 40.0g of IMR 4064 with a fed or cci primer...should get'r done!