Mighty Armory’s new 9mm Carbide PRO Sizing Decapping Die is lubeless with full length, SAAMI Spec sizing.
Mighty Armory sizing specs matter. You will see, feel and shoot the difference.
Our carbide die is the first of its kind ever introduced to the reloading world.
The Mighty Armory 9mm full length carbide sizing die is the only reloading die that offers 100% full length, concentric case sizing to SAAMI spec angles. Our sizing die will size your case from top to bottom, similar to a rifle sizing die.
What's the difference?
The Mighty Armory 9mm carbide reloading die will save you a step by eliminating the need to lube your cases.
The carbide sizes full length, it is not a ring insert. The carbide die has a full length bore in which the carbide is pressed into the die body under tension using a hydraulic system. We also steel wrap the bottom and add a stop inside the die body so that every die is exactly the same for ultimate strength and durability with ultra smooth operation.
The extended, full length sizing bore prevents under-sizing or over-sizing at the neck, shoulder and base. With the 9mm carbide sizing die, now you can load your rounds to SAAMI spec with every lever pull with no spray case lube required.
Expect multiple benefits when reloading with Mighty Armory dies, including smooth feed from magazines, easy feed into the chamber, correct case pressures, correct bullet tension, cleaner burning powder and increased accuracy. In addition, your brass will last longer for more reloads.
With Mighty Armory's new carbide 9mm reloading dies, chronographs will prove standard deviations will be single digits. Results will be better than factory sized loads!
The design will allow you to adjust the die for bullet diameter and length. Our tool-free design makes it quick and easy to setup.
