Sgt_Mike
Well-known member
Did two different ladders (only difference was brass Lapua vs LC LR both LRP) today to see how TAC might perform with the 175gr SMK SKU #2275
ladder 1 LC LR Brass CBTO 2.360" CCI primer..
41.0 = 2557
41.3 = 2584
41.6 = 2589
41.9 = 2643
42.2 = 2604
42.5 = 2702
42.8 = 2717
43.1 = 2694
43.4 = 2699
43.7 = 2716
44.0 = 2786
44.3 = 2764
Ladder 2 Lapua Brass CBTO 2.360" CCI primer..
41.0 =2441
41.3 = 2586
41.6 = 2604
41.9 = 2605
42.2 = 2601
42.5 = 2630
42.8 = 2676
43.1 = 2633
43.4 = 2682
43.7 = 2690
44.0 = 2732
44.3 = 2728
None of the load exhibited a heavy bolt lift, flattened primers, ejector swipes or indentation.
Ohh P.S. I forgot to mention all LRP brass.
ladder 1 LC LR Brass CBTO 2.360" CCI primer..
41.0 = 2557
41.3 = 2584
41.6 = 2589
41.9 = 2643
42.2 = 2604
42.5 = 2702
42.8 = 2717
43.1 = 2694
43.4 = 2699
43.7 = 2716
44.0 = 2786
44.3 = 2764
Ladder 2 Lapua Brass CBTO 2.360" CCI primer..
41.0 =2441
41.3 = 2586
41.6 = 2604
41.9 = 2605
42.2 = 2601
42.5 = 2630
42.8 = 2676
43.1 = 2633
43.4 = 2682
43.7 = 2690
44.0 = 2732
44.3 = 2728
None of the load exhibited a heavy bolt lift, flattened primers, ejector swipes or indentation.
Ohh P.S. I forgot to mention all LRP brass.
Last edited: