Originally Posted By: MGYSGTBearcat 74, Is that the same stuff that comes in the can for $50?
=======================================================================
Probably not! The tubes said fast setting....you want a slow cure epoxy; they are stronger and shrink less. You'll also get extra working time that is always appreciated! Get the Devcon epoxy steel putty, not the liquid. You could also use the aluminum or titanium putty, but I never saw the benefit for the added expense. Just remember, if you get a pound of this stuff, it has a shelf life and will not last forever.
I go back and forth between Devcon and Marine Tex, depending which is readily available. The Marine Tex has a more critical mixture ratio, but I weigh it on a digital scale, so it's no proplem.
Good luck!
F1