Bullet pulling

If they have been sitting around for awhile bump the bullet in just a bit with the seater die to break loose and then try the hammer. As mentioned a good shot of air should work if ya got access to a good compressor,just wear gloves so ya don't take a chance on ripping your skin with the air.
 
Last edited:
Originally Posted By: pdhunterI did try the inertia puller and hit as hard as possible on a concrete floor and they don't move at all .
The problem I have with buying the .204 collet is every where I check they want more for the shipping then the cost of the collet. So I am looking for another way to do it.

Don't be such a cheap skate and buy something else to make the shipping charge worth it. Every one needs just one more box of bullets, bag of brass, ETC...
thumbup.gif
 
just a thought, dont know if it would work but maybe, seat the bullet far enough to where it falls into the case, take your 204 expander off of the stem, replace with a 224 expander, size neck, dummp bullet out.
 
Originally Posted By: wybobjust a thought, dont know if it would work but maybe, seat the bullet far enough to where it falls into the case, take your 204 expander off of the stem, replace with a 224 expander, size neck, dummp bullet out.


Veeeeeeery clever.

I'm gonna put that one in my tricks list!

thumbup.gif
 
Lots of great ideas !
I'm going to give them a try and see what works.
I'm thinking the best plan is the next time Grand daughter wants to help by pulling the "long thing" I'll use a primed and charged case -
 
Back
Top