LC 223 Brass

[CSM52]

Where is the best place to purchase bulk lake city 223 brass? I have finally run through my big batch I acquired locally. Looking for ready to load brass.

Secondly is there a place to sent once fired lc brass with the crimp to be processed and swaged?

 

[Redneckbmxer24]

I’ve got Top Brass brand fully processed listed here:

http://www.predatormastersforums.com/for...266#Post3177266

Top brass is the best processed brass you can get. About 1200 over them are LC, 800+ WCC and then a handful of misc stuff. It’s all sorted too, so no need to do that.

 

[reb8600]

You can get fully processed LC brass at the link below. Not sure if they buy brass.

https://sagesreloadingsupply.com/index.php?route=product/category&path=60_79

 

[pahntr760]

Originally Posted By: CSM52Secondly is there a place to sent once fired lc brass with the crimp to be processed and swaged?

Sell off your LC brass and use that towards a batch of processed stuff like linked above.

 

[Bowhntr6pt]

I sent you a PM reference LC brass.

 

[MGYSGT]

Do the primer crimp yourself by getting a counter sink from Lowes/Depot. Chuck it up and press to the crimp for count of 2 or 3. Crimp gone and a nice beveled edge to seat primers.

 

[reb8600]

Originally Posted By: MGYSGTDo the primer crimp yourself by getting a counter sink from Lowes/Depot. Chuck it up and press to the crimp for count of 2 or 3. Crimp gone and a nice beveled edge to seat primers.

Good way to mess up brass if you don’t know what you are doing. I bought some brass from someone here that I think did just that process. Had to throw it all away. No need to bevel the primer pocket. There are tools out there for doing the job the right way.