Mxracer532
New member
Got a good deal from a fellow member and really need shell plates 16 for my wifes .380 and .45acp for my .45. I have checked all the major stores sold out and on backorder.
Lock n load shell plates 16 & 45 needed. HELP!!
- Thread starter Mxracer532
- Start date
Good luck. The only place you can find them now is ebay and there aint no way I am paying those prices. Cabelas did have the #10 in stock the other day and I picked one of them up but they didnt last long. I need a 45 also but can wait until the panic buying stops. I have seen them go for $150+ on ebay
Mxracer532
New member
Ya im with u as well, no way in [beeep] im paying $150 for a shell plate.
Mxracer532
New member
Im guessing thr EZ eject. Havent got the press to my house yet. I literally found it from another member yesterday. Its brand new so im guessing its the new version.
Breeze
Member
Originally Posted By: Mxracer532Im guessing thr EZ eject. Havent got the press to my house yet. I literally found it from another member yesterday. Its brand new so im guessing its the new version.
The reason I asked ,the older plates for the wire eject don't have the groove cut in them for the ez eject base plate,but you may be able to find the old style shell plates cheaper & if you contact hornady they will cut the ez eject groove in them for 10.00 a plate,on a side note the old syle plate # 1 fits the 45 acp. as for the # 16 plate for your 380 that also is the plate used for 223 so it may be harder to get a hold of.
The reason I asked ,the older plates for the wire eject don't have the groove cut in them for the ez eject base plate,but you may be able to find the old style shell plates cheaper & if you contact hornady they will cut the ez eject groove in them for 10.00 a plate,on a side note the old syle plate # 1 fits the 45 acp. as for the # 16 plate for your 380 that also is the plate used for 223 so it may be harder to get a hold of.
Mxracer532
New member
Originally Posted By: BreezeOriginally Posted By: Mxracer532Im guessing thr EZ eject. Havent got the press to my house yet. I literally found it from another member yesterday. Its brand new so im guessing its the new version.
The reason I asked ,the older plates for the wire eject don't have the groove cut in them for the ez eject base plate,but you may be able to find the old style shell plates cheaper & if you contact hornady they will cut the ez eject groove in them for 10.00 a plate,on a side note the old syle plate # 1 fits the 45 acp. as for the # 16 plate for your 380 that also is the plate used for 223 so it may be harder to get a hold of.
Ya its gonna be the new style. I actually ordered the #16 plate from Cabelas early sat morning thanks to a member here who told me they had them in stock. I checked and sure enough they were so ordered one and today got an email saying they were on backorder till tentetively march 27th. I called and bitched but got nowhere. Needless to say I hate Cabelas right now.
The reason I asked ,the older plates for the wire eject don't have the groove cut in them for the ez eject base plate,but you may be able to find the old style shell plates cheaper & if you contact hornady they will cut the ez eject groove in them for 10.00 a plate,on a side note the old syle plate # 1 fits the 45 acp. as for the # 16 plate for your 380 that also is the plate used for 223 so it may be harder to get a hold of.
Ya its gonna be the new style. I actually ordered the #16 plate from Cabelas early sat morning thanks to a member here who told me they had them in stock. I checked and sure enough they were so ordered one and today got an email saying they were on backorder till tentetively march 27th. I called and bitched but got nowhere. Needless to say I hate Cabelas right now.
I have a #16 and a #1 shell plate that was sent back to hornady and updated to the ez eject, if you are still looking. I believe the #1 And #45 are the same if its for 45 acp. Let me know if you are interested and we can work something out.
Joe
Originally Posted By: Mxracer532Originally Posted By: BreezeOriginally Posted By: Mxracer532Im guessing thr EZ eject. Havent got the press to my house yet. I literally found it from another member yesterday. Its brand new so im guessing its the new version.
The reason I asked ,the older plates for the wire eject don't have the groove cut in them for the ez eject base plate,but you may be able to find the old style shell plates cheaper & if you contact hornady they will cut the ez eject groove in them for 10.00 a plate,on a side note the old syle plate # 1 fits the 45 acp. as for the # 16 plate for your 380 that also is the plate used for 223 so it may be harder to get a hold of.
Ya its gonna be the new style. I actually ordered the #16 plate from Cabelas early sat morning thanks to a member here who told me they had them in stock. I checked and sure enough they were so ordered one and today got an email saying they were on backorder till tentetively march 27th. I called and bitched but got nowhere. Needless to say I hate Cabelas right now.
Joe
Originally Posted By: Mxracer532Originally Posted By: BreezeOriginally Posted By: Mxracer532Im guessing thr EZ eject. Havent got the press to my house yet. I literally found it from another member yesterday. Its brand new so im guessing its the new version.
The reason I asked ,the older plates for the wire eject don't have the groove cut in them for the ez eject base plate,but you may be able to find the old style shell plates cheaper & if you contact hornady they will cut the ez eject groove in them for 10.00 a plate,on a side note the old syle plate # 1 fits the 45 acp. as for the # 16 plate for your 380 that also is the plate used for 223 so it may be harder to get a hold of.
Ya its gonna be the new style. I actually ordered the #16 plate from Cabelas early sat morning thanks to a member here who told me they had them in stock. I checked and sure enough they were so ordered one and today got an email saying they were on backorder till tentetively march 27th. I called and bitched but got nowhere. Needless to say I hate Cabelas right now.