Mounting ATN 4k pro on Tikka CTR

K

KoyoteKillerz

Member
I have a Tikka T3x CTR in 6.5 creedmoor with the picatinny rail on top. Trying to mount my ATN 4k 5x20 (30mm) on it. I know ATN makes a QD mount for the scope. I'm having a few different problems.. One is I need to bring the scope back for proper eye relief and im trying to keep the scope mounted as low as possible. The next is I'd like to have a 1 piece mount but I need 3.5" inside to inside of the rings. The closest thing I've found was an Aero precision with 3.45" inside to inside. My next problem is if I can't find something that brings it back and keeps it low ill have to put an adjustable cheek piece on to get the proper cheek weld. Any help would be appreciated. Thanks
 
If you can't get a low mount, I wouldn't worry about adding higher cheek piece. I have always been partial to low mounting scope, but, when there is no other option, I found this high scope mount on M1 Garand to be quite functional.

Regards,
hm
 
My understanding is that the ARMS #35 will fit the 4K saddle spacing with their slide rail rings. It is a 1 piece QD with various ring options to be mounted in the track. From looking at the #35 rings, they look to be offset so that they could be opposed in the rail and set closer to the shooter. I'm thinking the ATN 1 piece mount could be inverted to do the same thing. Put the offset ring back instead of forward.
 
Thanks for the responses. I'm in the process of looking into the ARMS mounting system but I'm open to any other options as well. If I don't put a cheek rest on then my cheek weld is about the bottom of my chin.
 


Write your reply...
Back
Top