My DIY Reloading bench

Originally Posted By: KenlguyYou're going to want a bigger one within 6 months.


Trust me on this
thumbup1.gif

Guaranteed!
Mine is 2.5' wide and 16' long and still seems small sometimes.

Jack
 
Originally Posted By: Jack RobertsOriginally Posted By: KenlguyYou're going to want a bigger one within 6 months.


Trust me on this
thumbup1.gif

Guaranteed!
Mine is 2.5' wide and 16' long and still seems small sometimes.

Jack

Jack is right. You may think it's big enough now but give it time. It will get real small real fast. I know mine always did.

I started out with a small kitchen table bolted to the wall in the basement. now my bench is 34 inches deep, 16 feet long with cabinets and shelves and sometimes I think I still don't have enough room. It will all come together in time though.

By the way, nice looking bench. I know you'll have fun working up loads on it.
 
Good job on the bench, it's a lot nicer than what I started out with.

Should prove very satisfying fine tuning your own ammo over the years.

Cheers

Silvertp
 
No ,just thinking about the old joke when I saw the building.Cool building.Cool bench also.If you are just loading for one rifle for now it may be big enough for a while.I'm sure you will be moving you loading to different location sometime anyway.
 
Good job. I predict that first bench will eventually become your rifle cleaning bench. I have two 2'x 8' tables and still wish I had more. Good Luck.
 
Nice work. Beware of the carpet as you aren't susposed to vacuum spilled gunpowder. Might be a good idea to put down some plastic sheeting.
 


Write your reply...
Back
Top