Proggresive reloading press lube ????

M

Moki

New member
I want to load 223 Rem with my RCBS Rockchucker Piggyback 2 progressive press.

I have only used the Piggyback press for loading my handgun rounds before with carbide resizing dies.

I have always loaded bottle neck cases single stage before and was wondering how to lubricate the cases in a progressive press with out cleaning the lube off the cases?

My concern is contaminating the primers resulting in failure to fire.

I have a standard RCBS group A 2 die set now.
 
Use the Dillon spray-lube. If you use it correctly you will never have a problem with primers. I have loaded boat-loads of .223 rounds and have never had a primer fail.
 
I use Dillon spray lube also but i load in two stages first stage i put about a 100rds in a tupperware tube spray them with lube dump them in the case feader size them deprime them and trim them with a Dillon case trimmer
then clean them in a tumbler i do 1000-2000 cases this way at a time .second stage
then when i want to load them they go through a decaping die to get the cleaning meadia out of the flash hole then primed, powder and bullet.

Gary
 
Hornady One-Shot aerosol spray lube. I use it with my Dillon 550B when reloading .204 Ruger. Nice thing about the stuff is doesn't have that sticky feel and its doesn't neutralize primers.
 
Back
Top