Remington's new 11-87 Super Magnum Predator

Byron South

New member
Just got Remington's new 11-87 Predator shotgun yesterday and thought ya'll might like a sneak peak. They should be available right after the first of the year. Don't ask me for a specific date but I believe they are in production.

DSC01406-Copy.jpg


The first thing you will notice is the new stock design. It's called the "Shur Shot" stock. Being a lefty I was glad to see it is an ambi. Basically it is a pistol grip stock with a high comb to put you at the proper height for the nice fiber optic sights.

The next thing you will notice right away is the extended magazine. This shotgun hold 6 3" shells and 1 in the pipe for a total capacity of 7 (6+1).

DSC01404-Copy.jpg

DSC01394-Copy.jpg


It is also drilled and tapped to facilitate a weaver rail that is an optional accessory. This would be cool with a halo sight or EO Tech, but quiet frankly I kinda like the fiber optic sights.

With a front coming through today and the wind blowing in excess of 30 mph, I decided my day would be better spent at the range getting to know this new shotgun rather than trying to call a coyote or two. Plus, tomorrow should be a good day to call and I wanted to get my new shotgun ready.

Remington also sent me some of their new Wingmaster HD loads in BB's and T's. Both in 3".

The 11-87 came with an extended choke marked "Wingmaster HD Turkey/Predator". Calson's Chokes also sent me three different chokes to try, the "Dead Coyote" choke, a .680 and a .670.
DSC01395-Copy.jpg


With this new shotgun, two loads, and three chokes I had my work cut out.

Most of my shooting was done at 40 yards and once I decided on a choke I backed of to 50 to shoot it three more times for confomation on what I can expect. 50 yards is my self imposed limit as I know the little pellets are running out of steam and getting pretty thin on the target usually by 50.

I won't bore you with all the targets and quiet frankly I'm to tired to try and post them all. What I will show you is the targets shot with the combination I settled on.

I was running out of paper to pattern with so I decided to shoot three shots on each sheet and mark them where I could tell one from the other. The first shot is marked by coloring over the pellet hole in a circle. The second shot is marked by drawing a box around the pellet hole, and the third a triangle. In the center as an aiming point I stapled a 9" paper plate. On the right you can see the pellet count for each shot.

This target is shot with the combination that did the best.
DSC01372-Copy.jpg


If you will notice the pattern was a little high. The reason soon became evident when I went to adjust the rear sight. After about 30-40 rounds of this HD stuff the sight had moved forward during recoil. I moved it after and shot it in and centered the pattern. I would show you the target but it was a mess as I only changed the paper plate and not the back paper.
DSC01379-Copy.jpg


This is a target shooting the HD T's through the same choke. Both loads like this choke the best. This was also shot before I re-adjusted the sights. You can see that if the sight would have been adjusted properly the results would have been more hits in the paper plate.

DSC01378-Copy.jpg


Here is a target shot at 50 yards. I didn't change the back paper but just put a new paper plate on it. I got 5 hits twice and 9 hits once. I believe this will do as the rest were very evenly spaced within close proximity. I feel confident in being able to get a quick follow up shot, which at these ranges is a good idea. If he quivers he'll get another and quick.
DSC01400-Copy.jpg


To sum it up. I've settled on the Carlson's .680 choke and the 3" HD BB's.

On another note I shot all these while resting on shooting sticks and sitting on a folding chair. The 11-87 really absorbs the recoil but I still think I'm gonna be a little sore. I really like this shotgun and load. I'm also tickled that Remington is making an effort to build guns and loads that better suit us predator hunters. I'm aware of some other things they are working on that will be coming out in the not to distant future as well.

Good Hunting, Be Safe, Have Fun and above all God Bless,

Byron /ubbthreads/images/graemlins/grin.gif
 
Last edited:
Byron,

Thank you for the write up. Looks like Remington has identified a good market!
Does the Predator also handle the 3.5" shells?
Any idea on pricing yet?
What accessories will be available? Light brackets, etc...

JD338
 
Yes it will handle 3.5" loads. As far as the accessories, my shotgun came with a sling. In the box was also info on a Weaver rail that will fit the receiver. There are some light mounts on the market that make mounting a light on a shotgun tube pretty easy. I had one for my Benelli, I sure it will fit the Remington.

Not sure what the pricing will be. But I'm guessing just under a grand.

Byron
 
Thanks guys.

Lance,

I do like it better than the Benelli. I sold a my Beretta to buy the Benelli but wished I hadn't done it. Not that the Benelli wasn't a good gun but it recoiled more even though it was heavier, and had an 18" barrel. I didn't think the short barrel would effect the velocity, but it did.

As for the new shotgun. I really do like it and have to say it's the softest recoiling shotgun I've shot in a while. It carries more rounds, (6) and is camoed in my favorite flavor. Most of all, I like it because it is designed from the ground up to be a "Predator" gun. Remington is also sending me a more traditional "Monte Carlo" stock (without pistol grip) that I'm betting I'll like too, maybe even better. It is also designed with the rifle sights in mind. The pistol grip is fine for shooting off sticks but the more traditional stock is more condusive to proper wing shooting. I know coyotes aren't geese but when they fly by at shotgun range it can be a lot like wing shooting.

Byron /ubbthreads/images/graemlins/grin.gif
 
Thanks for the review Byron. Good lookin' rig. I'm not much for the grip, I cannot get used to that style and I've shot them quite a bit. Regular flavor grip for me... Interesting that you settled on the HD-BB load. I found that by far the better patterning load over the HD-T's. Maybe someone elses rig will fling the HD-T into a neat cluster, I just couldn't get them to pattern well at all. The Dead Coyote T's on the other hand patterned quite well. And that is why we go to the range, to find the best combo for our rig. Looking forward to seeing some collapsed coyotes laying around that posing for some pictures. Safe hunting... /ubbthreads/images/graemlins/grinning-smiley-003.gif
 
GC,

Thanks. I'm with you on the grip. That is why I ask them to send me the "Monte Carlo" stock. I love the pistol grip on my AR's but somehow can't seem to warm up to them on a shotgun. I will say though, this one is way more comfortable than the one on the Benelli M-4 I had. In fact I took it off as soon as I could get the standard stock. With this being said I'm sure lots of guys will like it. I'm told they will offer it both ways. Not sure if you saw in my last post in this thread where I likend shotgunning coyotes to wing shooting, but I too favor the more traditional stocks for this type shooting.

As you know I've been using the DC load since before it was available to the public with good results. I like the load a lot. I've also shot a four or five box's of the HD T's and found them very similar. In fact alost identical. The HD shot is not as brittle and was smoother. Not sure it would make a differance to a coyote though :). What I do know for a fact is that the Heavy T's sure will break bones and out penatrate anything I've ever shot through a shotgun. I'm assuming the BB's will do almost as well in the bone breaking and penatrating departments with the added benifit of more potential hits (denser pattern). Time will tell as I do plan on putting to the test.

Good Hunting,

Byron /ubbthreads/images/graemlins/grin.gif
 
The old 835 might go down the road! That's just plain cool. Looks like it would be a dream to shoot. Dang, I thought I was getting caught up with the gun buying.
 
thanks Byron for posting!

I sold my Benelli Super Black Eagle because of the EXTREME recoil also and have been shooting a standard 3" 1100 and a 11/87 ever since, they sure do take a lot of kick out of these hard kicking loads.

I am shooting a 20" pattern in my 11/87 at 40 yards with #4 buck using a Hastings turkey choke. The same choke will pattern 000 Rem buck in a 15" circle at 40 yards, I have no idea of the constriction of these choke.

I plan on putting a Nikon Aim point on my mine. The Nikon has several different size dots that you can instantly adjust the scope for, along with many settings on red dot intensity. I think that this will allow a quicker pick up on shot acquisition. I shot crows with one of these Nikon Aim points and was amazed at how fast I could pick up a crow.

I have tried several of these aimpoints and I think that all of them were junk with the exception of the Nikon.

Thanks for posting and Merry Christmas!
 
Is the stock milk jug plastic or a higher tech. better quality synthetic ?

I would think on a $1000.00 shotgun one would get something more than milk jug plastic. They can cammo pattern wood just fine to /ubbthreads/images/graemlins/wink.gif
 
Thought I would post and update on my new shotgun. As you will notice in the pictures I've swapped out stocks. I liked the new "Shur Shot" stock from Remington and I'm sure it will be the stock of choice for a lot of guys. If I were using this gun off of sticks or turkey hunting with it I would certainly prefer it. This being said I finally got a "Monte Carlo" stock and love it. The high comb put the sights right where they need to be (So does the "Shur Shot" stock, but the conventional grip lends itslef to better swing shooting for me. I'm sure Remington will offer this shotgun with either stock. At least I hope they do.
11-87coyote.jpg


11-87coyote2.jpg


CopyofDSC01434.jpg


Good Hunting and God Bless,

Byron
 
Byron - I'm also wondering about the safety, about the only gripe I have with the Remington line of shotguns. Also, will the gun come with a camo'd extended magazine and mag. tube holder (??? brackit thingy???)?
 
Byron - I'm also wondering about the safety, about the only gripe I have with the Remington line of shotguns. Also, will the gun come with a camo'd extended magazine and mag. tube holder? Any news on the safety? I believe your left handed also, a nice left handed safety would be an nice addition to this line of shotguns ..... actually to any of the Remington sotguns.
 


Write your reply...
Back
Top