D_Bell
Active member
Just letting everyone know my tips for getting my brass cleaned with a Sonic cleaner. I remove the primers from my brass before cleaning.
[*]Sonic I heat up my distilled water in he microwave before I put it in my sonic cleaner. Set my cleaner to 122 degrees[*]Then I add my brass cleaner (Lemi-Shine), about 2 tablespoons, and mix it up before adding my brass.[*]Add my brass, run 25 to 40 mins until primer pockets are carbon free.[*]Then rinse the brass off in cold, clean distilled water, in a container I can shake the brass up in. Drain the water off the brass.[*]I towel dry all my brass to get all the excess water off.[*]I place the dried off the brass into an case dryer, until brass is completely dry. About an hour.[*]Once dry, the brass gets put into a tumbler, with a little bit of polishing paste. Run the tumbler for about 45 mins to an hour.[*]Separate the media from the brass.[/list]
My brass come out looking new...
[*]Sonic I heat up my distilled water in he microwave before I put it in my sonic cleaner. Set my cleaner to 122 degrees[*]Then I add my brass cleaner (Lemi-Shine), about 2 tablespoons, and mix it up before adding my brass.[*]Add my brass, run 25 to 40 mins until primer pockets are carbon free.[*]Then rinse the brass off in cold, clean distilled water, in a container I can shake the brass up in. Drain the water off the brass.[*]I towel dry all my brass to get all the excess water off.[*]I place the dried off the brass into an case dryer, until brass is completely dry. About an hour.[*]Once dry, the brass gets put into a tumbler, with a little bit of polishing paste. Run the tumbler for about 45 mins to an hour.[*]Separate the media from the brass.[/list]
My brass come out looking new...