One last note on the Boyds, is if you currently have a "plastic" stock your action screw won't be long enough to screw in. You can remedy this in two ways.
One get a new screw from Savage for the same rifle but the wood stock version,
or two, what I did, was pop out the plastic grommet from the action screw hole and grind 1/4 to 1/3 of it off, slide it back in and your good. You'll want to make sure you see how much of the screw currently "shows" when inserted in your current plastic stock, and only grind off that much (or less)from the grommet. If you have a wood stock, youre good and dont need to do anything.