Muleskinner2
New member
I don't know if this will help but I do know it cleared all my background noise up.
Download your sound into your computer via whatever. I used a cheap $9 little boom box thatI got at WalMart.(didn't have a long enought patch cord for JVC home stero) I used the RS black cord for the RS amp to do so.
Ok enough of that, once you get goldwave opened and you get the sound up that you want to mess with. You'll see the tool bars at the top of your screen. Go to the second toolbar down and the seventh box in from the right should be " noise red". click on it to open it. In the middle of the window, you should see Presetes, click the arrow and click on Hiss remvl, then click ok. It will download, when it's done, click save on the tool bar. Repeat the process for HUM. make sure you click save after each one.
The third process is on the second tool bar down go to "Dynamics" second box in from the left. Click on it to open it and at the bottom of the screen you should see presets. click the arrow to open the drop down window and scroll down to THRESHOLD click on it and click ok. It will download and make sur ya click save.
Now listen to your sound. It should be clear. I even recorded hand calls ont the DVR and put them on there and cleaned them up. To record them back to the DVR, I used the same black RS amp wire. Plugged it into the headphone jack on my computer speaker then into the mic jack on the DVR. Turn the volume down to about 4 on the computer keyboard and turned the DVR volume to about 10. They came out crystal clear.
I hope this will help I know it did for me.
Thanx for your time
Download your sound into your computer via whatever. I used a cheap $9 little boom box thatI got at WalMart.(didn't have a long enought patch cord for JVC home stero) I used the RS black cord for the RS amp to do so.
Ok enough of that, once you get goldwave opened and you get the sound up that you want to mess with. You'll see the tool bars at the top of your screen. Go to the second toolbar down and the seventh box in from the right should be " noise red". click on it to open it. In the middle of the window, you should see Presetes, click the arrow and click on Hiss remvl, then click ok. It will download, when it's done, click save on the tool bar. Repeat the process for HUM. make sure you click save after each one.
The third process is on the second tool bar down go to "Dynamics" second box in from the left. Click on it to open it and at the bottom of the screen you should see presets. click the arrow to open the drop down window and scroll down to THRESHOLD click on it and click ok. It will download and make sur ya click save.
Now listen to your sound. It should be clear. I even recorded hand calls ont the DVR and put them on there and cleaned them up. To record them back to the DVR, I used the same black RS amp wire. Plugged it into the headphone jack on my computer speaker then into the mic jack on the DVR. Turn the volume down to about 4 on the computer keyboard and turned the DVR volume to about 10. They came out crystal clear.
I hope this will help I know it did for me.
Thanx for your time