Dixiedog1
New member
I like the speed of cleaning my cases with my Lyman walnut tumbling media but I don't like all the residue left behind. To do a little visual on the amount of residue left on the brass I tumbled 100 pcs of brass with 2 new dryer sheets in my Lyman walnut that had been used twice before....I ran the brass for a little over 1 hr and then ran it through my separator for 5 minutes tossing the heck out of it. Then I brought it in and ran those same 100 pcs through my Hornady Magnum ultrasonic cleaner with 2 capfuls of the Hornady brass solution and the rest plain old tap water.
Here's the cleaning solution I poured out of my Hornady Magnum ultrasonic cleaner
The Hornady brass cleaner is light green and the only other thing in there is water....all that brown crud is leftover media dust.
No wonder all my casings were always scratched up so badly.
Here's the cleaning solution I poured out of my Hornady Magnum ultrasonic cleaner
The Hornady brass cleaner is light green and the only other thing in there is water....all that brown crud is leftover media dust.