I'm not sure about the rules for posting a link to another forum, so if anyone is interested PM me and I'll provide the link. I am in no way associated with this seller, but have bought many items from him on another forum.
100%, NO QUESTIONS ASKED, MONEY BACK GUARANTEE.
How it works:
It works by applying pressure to the bottom of the rear of the trigger with a setscrew. This lifts the rear of your trigger up against the safety lever and preloads your trigger removing most, if not all, of the pre travel.
To check to see if this will help your trigger do this. Make sure your rifle is unloaded then place it on safe. Pull the trigger while it is on safe. The amount the trigger moves while on safe is what will be removed by this kit.
What it does:
Installs in less than 10 minutes with basic hand tools
Increases accuracy potential by eliminating the take up in the trigger
Creates a trigger that has a very short take up similar to a quality bolt action rifle
What it doesn't do:
Decrease trigger pull weight
Permanently alter your firearm
Create an unsafe firearm if installed properly
It works with standard MILSPEC triggers as well as two stage triggers that are not self contained units. It also improves the felt trigger on full auto M16/M4 style machine guns. Basically it works with any gun that uses an AR15 style FCG, either semi auto or full auto, with a removable AR15 style grip and with a grip screw hole that is threaded all the way through. For an amazing trigger install some reduced weight trigger and hammer springs.
On an already safe, unmodified weapon, that is functioning correctly it is impossible for the trigger to be preloaded to a point where it is unsafe. It does not change your trigger pull weight, only the amount of trigger travel before the weapon fires.
Honestly this idea is nothing new. What is new is the parts being packaged together and sold as a complete "kit", especially at this price. You will no longer have to hacksaw or grind your factory parts and hope you get it right. This kit makes sure you get it right the first time without the need to alter your factory parts. And you can't even buy a replacement grip screw for less than this kit shipped if you mess yours up trying this yourself. And all it takes is burr on your hacksawed grip screw and your lower is ruined.
This is a proven kit that WORKS and does not permanently alter your AR in any way.
This kit also includes a set of very detailed instructions on how to install as well as how to perform a proper function check of your AR15 style weapon.
If you have any problems installing the kit PM a call can be made to help you out.
There will be a 100% guarantee on all parts we send as well as a satisfaction guarantee. If you ask for a refund you will get a refund with no questions asked. If the parts you receive will not work or if you are not 100% satisfied with this "kit" return I will give you a full refund of the original purchase price. You can get a refund for any reason or no reason at all.
The price is $13 shipped. The kit will include detailed instructions, the setscrew used to preload the trigger and a replacement grip screw. They will not be shipped outside of the United States.
Payments should be made through PayPal to ..................
You are buying goods so use that option in your PayPal payment. It provides protections for both of us. And it also makes sure WE cover the fees and not you. It also makes getting your address easier so we can ship your kit as quickly as possible.
It will only shipped to the address in PayPal or the return address on the MO. This is only to protect the purchasers. If you want to send a MO please PM me.
We will combine shipping. The cost for each additional kit in the same package is $10. So that is $23 shipped for two, $33 for 3, $43 for 4, so on and so forth. And for a limited time, until supplies run out, mention 300 Blackout and receive a special bonus.
Some information on the grip screw holes threaded all the way through. It never was an issue in the past but recently some lowers have been produced with their grip screw hole not threaded all the way through. It is less than 1% based on the sales of these kits. So odds are your lower will work with this kit but if it doesn't I will issue a refund, no questions asked. Or you could buy a $4 tap and finish threading the grip screw hole so you can install this kit. The tap would need to be 1/4-28 and because you are threading aluminum it can be HSS or even carbon steel which you can find on Ebay for ~$4.
Again, I will issue a refund to anyone who asks for a refund. I don't care the reason, or if there is a reason, if you ask you will get it.
_________________