foxpro 416b

[howler243]

I just traded a goose call for a foxpro 416B no remote. Has any one had an issue with the wire for the speaker breaking off after so many times of having to unscrew the cap. If so did you modify it?

 

[rivervalley]

When opening the caller hold the center of the speaker (cone part) so it doesn't turn when you unscrew the outer ring. I used to have one and that is what I did to prevent the wires inside from twisting.

 

[howler243]

Thank you that works perfectly

 

[howler243]

Do you need a PG-1 adaptor to switch sounds on a 416b or do you have to send it in

 

[doggin coyotes]

To do it urself, you gotta have the programmer, otherwise ya gotta send it in. No other ways.

 

[TNyoteboy]

I'm glad I saw this. I broke a wire unbeknownst to me on the battery connection for the battery pack on my 416B yesterday and while resoldering it, I was wondering if there had to be a better way of screwing the speaker back on each time I changed batteries and not twisting the wires. You see, my speaker was hot glued onto the ring and I had to turn it the opposite direction for about a turn, then screw it back on so the wires wouldn't twist so bad. I read this and broke it loose and removed the glue. Now, no problem!

 

[rivervalley]

My 416B used the PG1A adapter to change sounds. It had a 30 second sound loop. The PG1 is for a 15 second sound loop.

 

[stealheadwilly]

Does the PG1A adapter allow you to down load sounds from your computer to your fox pro

 

[reb8600]

Originally Posted By: stealheadwillyDoes the PG1A adapter allow you to down load sounds from your computer to your fox pro

It dont download. You play the sound and use the PG1A to record it to the Foxpro. You may have to play with the volume to get it to sound right. You plug the PG1A into the speaker jack and connect it to the wire inside the Foxpro.

 

[Bucksnbolders]

I now it can be done because I got one from my cousin and his father in law has recorded a different sound on it, but I'm not sure how he did it.