Oneleaf mt1000lrf 100 yds comparison

I did read a post somewhere that they did a firmware update to fix a shift of reticle issue [number 10 ] I think. My fit for the 50mm lens wasn't that tight with the original O ring and I replaced it with the supplied bigger O ring which made it significantly tighter but I can't say if I had a shift as I have only been using it as a hand held lately
 
DoubleUp said:
Vic, I'm running the latest firmware. I just thought folks might want to test it before trusting it.
Click to expand...
I am having a vertical shift issue as well as a tracking issue when adjusting zero, and after a few trouble shooting emails including a pic/video with Larry they are sending me 3 different sized O-rings to tighten up the lens attachment joint and their new thicker QD mount to replace the original I purchased.
Though I don't like the fact that I had a POI shift and found the shift issue, I can't say enough good about the customer service I have received from "Larry" over this and other times I contacted him to explain stuff about the scope that I could not get through my thick skull.
Also, this new mount is not listed on their website yet and they also have a version 11 update that as of 2 weeks ago was also not on the site. Larry sent me the v11 when we first started the trouble shooting.
 
The three scopes I bought have lenses that are really tight fitting.
I applied a very light coat of dielectric grease on the o-rings to make it much easier to change lenses.
No issues with a wandering zero with lens removal.
SJC
 
There are lots of reviews of the Mars OneleafAi MT1000 thermal scope floating around on YouTube, but not very many featuring more than one or two coyote kills. This video covers close up shots under 25 yds. all the way out to 312 yds. It shows 4 different reticles and 3 different colors in both black hot and white hot during optimal weather and terrible after all day rain and with high humidity. It shows with the Picture in Picture and without so the viewer should get a good idea of the capabilities of this scope. A couple of the close shot happened so quickly that I didn't have time to either refocus or reduce the zoom level.

 
RockorSomethingReviews said:


Link is to my YouTube channel where ive put together various 100ish yd shots with different thermals including the thermnight 335R, agm rattler, oneleaf, and rix l3.
Click to expand...

I used your discount code for 5% off ,worked fine , I ordered on May 9th and got order comf and a invoiv# , but now 7 days later no shipping info , is this normal , or should I contact one leaf ?
 
QUOTE="rude dog, post: 3423229, member: 50957"]
I used your discount code for 5% off ,worked fine , I ordered on May 9th and got order comf and a invoiv# , but now 7 days later no shipping info , is this normal , or should I contact one leaf ?
[/QUOTE]
Contact them. Mine came in 7 days and that was over Thanksgiving.
 
Back
Top